Screening Equipment – Persistent Casting https://www.persistentcasting.com Casting & Crusher Equipment Manufacturer Wed, 12 May 2021 14:04:19 +0000 en-US hourly 1 https://wordpress.org/?v=6.0 High Particle Acceleration / Flip Flo Screen (HPA) https://www.persistentcasting.com/product/high-particle-acceleration-flip-flo-screen-hpa/ Sat, 06 Mar 2021 14:39:43 +0000 https://www.persistentcasting.com/?post_type=product&p=1249 Constructional Features: The H.P.A. screening Machine consists of an inner and an outer screen frame. The screen panels or mats are clamped with the cross beams of the two frames. These frames are having opposite reciprocating motion at any point of time. The cross beams are having special profiles which ensure maximum space between them without sacrificing their rigidity. All cross beams are covered with rubber apron. The side walls of the inner frame are protected with stainless steel liners. The feed plate and the discharge lip are also provided with wear resistant liners. The inner frame is mounted on a set of rubber springs at each end while the outer frame is suspended from the inner frame by means of non-metallic spring elements. The reciprocating motion is imparted to the frames by vibrator unit which is similar to a crank shaft mechanism.  

Salient Features:

  • Efficient screening for moist material.
  • Efficient screening at low cut point.
  • All indigenous components.
 

Available Sizes:

WIDTH (m)

LENGTH (m)

NOMINAL MOTOR POWER (kW)

SCREEN Wt. (TON) WITHOUT DRIVE, SUPPOFIT & COVER
1.5 4.4 18.5 3.3
1.5 5.0 18.5 3.8
1.5 6.3 22 4.5
2.0 7.5 37 5.4
2.0 8.8 45 10
]]> Circular Motion/Linear Motion Vibrating Screen https://www.persistentcasting.com/product/circular-motion-linear-motion-vibrating-screen/ Sat, 06 Mar 2021 14:30:41 +0000 https://www.persistentcasting.com/?post_type=product&p=1247 Constructional Features: The basket is having two vertically parallel side plates connected through flanged cross beams or pipes bolted with them. A flanged tubular housing bolted with side plate near the CG of the basket is containing the eccentric shaft with eccentric masses at both ends. It is mounted on vibrating duty grease or oil lubricated self aligning spherical roller bearings through flanged bearing housing bolted to side plates. The basket is supported by 4 sets of mechanical coil spring in parallel or”Ir orientation. Screen deck panels made of wire mesh(carbon steel or spring steel ) having suitable opening are mounted tightly against a number of cross and longitudinal support, so orientated as to give a gentle Curvature for tight sitting by side stretching or longitudinal tensiondevice. The rubber or poly-urethane panels are mounted on specially design flat deck frame. Maximum number of decks can be four. The drive is through vee belts with motor supported on hinged spring loaded frame or by cardan shaft. Specially designed eccentric vee pulley in phase with basket motion is also provided to ensure a smooth drive.  
TYPE OF SCREEN NO. OF DECK MIN.SIZE MAX.SIZE
  ONE 0.8 m x 1.7 m 2.5 m x 6.6 m
CIRCULAR TWO 0.8m x 1.7 m 2.4m x 6.0 m
MOTION THREE 0.8m x 1.7 m 2.4 m x 6.0 m
  FOUR 1.0m x 2.5 m 2.0 m x 5.0 m
]]>